Reference Guide

Parameter
* Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description
The Screen parameter must be placed before the
Resolution parameter. For example:
screen=1 resolution=1280x1024 refresh=60
rotate=none
Connection Settings for wnos.ini files, {username}
INI, and $MAC INI files
The following table contains the parameters (and their options) used for configuring connection settings.
Table 9. Connection Settings: wnos.ini files, {username} INI, and $MAC INI files
Parameter
* Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description
**AltCacheDisable={no, yes}
Default is no.
Yes/no option to disable the new cache mechanism allowing more
memory to be available to a user. This is developed with Citrix
Presentation Server 4.0 and Windows Server. If set to no, the new
cache mechanism is enabled.
**Alternate={no, yes}
Default is no.
Yes/no option to use an alternate IP address returned from an ICA
master browser to get through firewalls. This setting in a wnos.ini
file will be saved into NVRAM if EnableLocal=yes is set in the
wnos.ini file.
AutoDetectNetwork={yes, no}
RDP Only.
Default is yes.
Yes/no option to enable RDP auto detect network feature. When
this option is set to yes the Optimize for low speed link and the
Desktop Experience options are disable by default.
**AutoSignoff={no, yes, 2-60}
[Shutdown={no, yes}]
[Reboot={no, yes}]
Default is no.
AutoSignoff —This option can be used to automatically sign-off a
user when the last opened session is closed. The default value is
no. A value ranging from 2 to 60 can be configured. This value
represents the number of seconds a session must be active prior
to calling AutoSignOff.
Shutdown — Default is no. Yes/no option to shut down the thin
client. If shutdown is set to yes, the ShutdownCounter value is
used to control the count-down before the system is turned off.
Reboot — Default is no. Yes/no option to reboot the thin client. If
Reboot is set to yes, the ShutdownCounter value is used to control
the count down before the system is rebooted.
ClearLicense={no, yes}
Default is no.
Yes/no option to clear the TSCAL license stored in the non-volatile
memory. It can be replaced by FixLicense=clean.
Parameters for wnos INI, {username} INI, and $MAC INI files 63