Reference Guide

Parameter
* Global overrides identically-named user
profile
** After sign off, user profile returns to
global value
Description
wnos/locale in the file server, and then add Locale=French load=yes in the
INI file. You can use Local=fr instead of Locale=French.
NOTE:
For Chinese Simplified, Chinese Traditional, Japanese, and Korean
localization, a font file must also be placed under the folder wnos/font in
the file server.
For example, if you want to specify the system language to be Japanese,
you must place a file named Japanese.msg under the folder wnos/locale
in the file server, place a file named Japanese.fnt under the folder wnos/
font in the file server, and then add Locale=Japanese load=yes in the INI
file.
If you are under a Wyse maintenance contract, you can download .fnt
and .msg files from your My Downloads page in the Self-Service Center.
If you are not under maintenance and wish to gain access to these files,
you must complete a product registration.
LocaleList=<value>
LocaleList — Specifies a list of locale, so that a user can switch the system language
as needed.
Values include: English, us, French, fr, German, de, Chinese Simplified, gb, Chinese
Traditional, b5, Japanese, jp, Korean, ko, Latin, la.
All the values will be displayed in the GUI. To view the GUI, click System Preference
> General > Locale. Be sure to place the necessary files, for example German.msg,
Japanese.msg, Japanese.fnt, and so on under the correct folders as described in the
Locale parameter description.
OSDRepeatRate={0, 1, 2}
OSD Repeat Rate—This feature is only supported on the Wyse 5470 All-in-One Thin
Client. This feature is designed to increase the speed of the OSD button used for
adjusting the brightness of the screen. The value ranges from 0-2, for example, the
parameter value is set to 0 which is default, it takes 20 seconds to adjust the
brightness of the screen from 0 to 100. If the value is set to 2, it will take 10 seconds
to adjust the brightness of the screen from 1 to 100.
OSDRepeatDelay={0, 1,2}
OSD Repeat Delay—This feature is only supported on the Wyse 5470 All-in-One
Thin Client. This feature is designed to decrease the speed of the OSD button used
for adjusting the brightness of the screen. The value ranges from 0-2, for example,
the parameter value is set to 0 which is default, it takes 20 seconds to adjust the
brightness of the screen from 0 to 100. If the value is set to 2, it will take 50 seconds
to adjust the brightness of the screen from 1 to 100.
**Password=<sign-on password>
[encrypt={no, yes}]
Specifies the password as the sign-on password; no minimum length; maximum length
is 64 characters.
In a wnos.ini file — If set to the default password, the system will sign on
automatically and not wait for username, password, and domain entries.
In a [username].ini file — Be sure it is the encrypted password of the user or the
system will fail to sign on. This can be changed by a user, if allowed, in the Sign-on
dialog box.
encrypt — Default is no. Yes/no option to use an encrypted string for a password in
the INI file instead of clear text. If encrypt=yes, the password in the INI is an ecrypted
string instead of cleartext . For example: Password=wyseatc@123
or
Parameters for wnos INI, {username} INI, and $MAC INI files 47