Reference Guide

Parameter Description
[ClearUser={yes, no}]
[DisableSignoff={yes, no}]
[SFZeroButtons={yes, no}]
[SignonStatusColor=“rrr ggg bbb”]
[SCHidePINLeft={yes, no}]
• killsessions or 2 — This option can be used with the AutoSignoff parameter.
SaveLastDomainUser — Yes/no option to save the username and domain into
NVRAM once signon is successful. On next reboot, the username and domain saved
in the NVRAM will be displayed in signon server as the default username and
domain if no DefaultUser is set in the wnos.ini file.
The size of username/domain is limited to 32 characters, and if larger than 32, it will
first be truncated and then saved into NVRAM.
DefaultINI — The optional DefaultINI configures a file name which is in the default
folder of the username ini files. If the {username}.ini is not found, this file will be
loaded as default.
IconGroupStyle — The optional IconGroupStyle configures the icon group style
on the desktop. PNAgent published applications can be configured with the client
folder in the PNA server.
If set IconGroupStyle=folder, the PNAgent published applications which are
specified to display on the desktop will display with the folder.
After clicking the folder icon, the subfolder or applications in this folder will display
on the desktop. In this case, there is an Up to 1 Level icon on top. Clicking the icon
will display the up one level folder contents.
IconGroupLayout — Default is vertical. Configures the direction of the icongroup
on the desktop.
PasswordVariables — Default is no. Yes/no option to support variable mapping
($TN, $UN etc) for a password.
Continued from the previous table...
LockTerminal — Default is yes. Yes/no option to lock the terminal. If set
LockTerminal=no, the function of locking terminal is disabled. It disables the Lock
Terminal from a Right Click on the desktop or from clicking the
Shutdown option
> Lock Terminal. It also disables lock terminal even if set ScreenSaver=minutes;
LockTerminal=yes.
ExpireTime — Specifies the signon expiration time. The range is 0 to 480 minutes.
The default is 0 which means no expiration.
If the value is larger than 480, then 480 is set instead. If the value is smaller than 0,
then 0 is set instead.
After system signon or starting a connection, the expiration time starts counting.
Once the expiration time is reached, starting a connection by clicking the icon, menu
or connection manager, will bring up a pop up message box to enter the password.
Only if the password is same as the original signon password, the session starts.
If the terminal is locked and unlocked with the password, the signon expiration time
starts counting again.
UnlockRefresh — Default is yes. Yes/no option to specifies the refresh action
after unlocking the system in classic mode.
Yes — While unlocking, the system will refresh the PNA list to verify the password.
No — Disables refresh.
SCShowCNName — Default is yes. Yes/no option to force the use of the CN
name of the certificate as the user name when using smartcard signon. The default
uses the UPN name as the user name.
SCSecurePINEntry — Default is no. Yes/no option to enable Secure PIN entry
function for pkcs15 smart card with Cherry keyboard.
AutoConnectTimeout— Default is 30 seconds.
This option sets the timeout for auto connect published application. The range is 10
seconds to 300 seconds.
Parameters for wnos INI files only
33