Reference Guide

Parameter Description
netcard, and internal hub) to the list that you want to use, and
all other devices are denied when the device is plugged-in.
2. When DEVICE_SECURITY=black_list is set, the security is mid-
level, and customer can add the device which is not present in
the list.
3. About key value: all the value are hex, and vid_pid =
0xvvvvpppp, class value is =0xccsspp; where,
• vvvv=device vendor id
• pppp=device product id
• cc= device interface class
• ss=device interface subclass
• pp=device interface protocol
4. Class name is abbreviation for the defined class. Valid names
are listed here:{Audio, CDC_control, HID, Pysical, Image,
MASS_STORAGE, Hub, CDC_Data, Smart_Card,
Content_Security, Video, Personal_Healthcare,
AudioVideo, Billboard, Diagnostic_Device,
Wireless, Miscellaneous, Application, VendorSpecific}. For
detailed information, refer:
www.usb.org/developers/
defined_class.
5. The max number of devices/class table is 16.
For Example:
DEVICE_SECURITY=white_list class=HID class=Audio
class=Video
DEVICE_SECURITY=black_list vid_pid=0x0B0E2000
class=0x030101.
PrinterMap=a text file name or possibly URL.
A text file to be included to define printer mappings. Each line in
the file is of format Printer Identification=Printer Driver Name. For
example: HL-1240 Series=HP LaserJet.
ThinPrintEnable={no, yes}
[Port=port number]
Default is yes.
ThinPrintEnable — Yes/no option to enable the thinprint client.
port—The TCP port of the thinprint client. The default port
number value is 4000. The port number value must be less than
65535.
SmbVersionRange={version_range} SmbVersionRange—Controls the SMB protocol version that is
used in SMB printer communication. The client only uses the SMB
version that is specified in version_range.
The format of version_range is lowest_version, highest_version.
LM2 stands for LAN manager 2, SMB1 for SMB version 1, and
SMB2 for SMB version 2. For example,
SmbVersionRange=SMB2,SMB2 means only SMB version 2 is
allowed; SmbVersionRange=,SMB2 means SMB version 2 and all
the supported lower versions can be used. Default version range is
set by SmbVersionRange=,SMB1. By default, SMB2 is not
supported.
Connection settings for wnos.ini files only
The following table contains the parameters used for configuring the connection settings. The default values are underlined.
18
Parameters for wnos INI files only