Reference Guide

Parameter Description
Disable—If the value is set to yes, the password field in sign-on
window is disabled. Default is no.
encrypt - The default value is no. The options are used to enable
or disable an encrypted string for a password in the INI file instead
of clear text. If the value is set to yes, the password in the INI is an
encrypt string instead of clear text.
DisableButton={no, yes}
[DisableRestart={yes, no}]
Default is no.
Yes/no option to disable the power button.
If you set the option DisableRestart=yes, the radio button Restart
the system in shutdown window is disabled. These settings are
saved permanently and the default value is no.
EnableGKey={yes, no}
Default is yes.
Yes/no option to enable G key reset. G key reset is supported for
Privilege=High in the NVRAM.
EnableVsync=[yes, no] The EnableVsync parameter enables or disables the Vertical
Synchronization feature. The value is not stored in NVRAM.
Exit={yes, no, all}
Default is yes.
Specifies the INI file processing.
yes — Processing returns to the prior INI file on the next line after
$include.
no — There is no operation.
all — All INI file processing is exited.
Include=<$mac.ini file or {username}.ini file> <$MAC.ini> Loads /wnos/inc/mac-address.ini.
NOTE:
The file name does not include the symbol : in the mac
address. See also the Exit parameter for information on
how to terminate Include. <{username}.ini> Loads /
wnos/inc/{username}-address.ini.
The file name does not include the symbol : in the
{username} address. See also the Exit parameter for
information on how to terminate Include.
ManualOverride=[no, yes]
[Components={None, display, keyboard, mouse, timezone,
network, audio, printer, language, All}]
The parameter ManualOverride allows the end users to keep their
personalized settings. The default value is No.
If the value is set to No, personalized setting is not allowed.
If the value is set to Yes, the personalized settings are saved in the
device component which can be specified through the
components option.
The parameter Components specifies the component that is
allowed as a personalized setting. Currently the options supported
are None, display, keyboard, mouse, timezone, network, audio,
printer, language, all. The default value is
None.
NOTE:
If the parameter ManualOverride is set, a warning
message is displayed when the users try to reset the
device to allow them to retain the personalized settings
or revert to default settings. The components set using
the INI statements are ignored.
Parameters for wnos INI files only 15