Reference Guide

Seamless — Available for use if the connection is to a published
application. For Seamless connections, the MetaFrame hosts select
the best-t connection window for applications.
<monitor resolution> — Resolution values you can use in the form
X x Y depending on your client. Example for monitor resolution:
1024 x 768. See the Release Notes of your client.
SessionReliability={no, yes}
Default is no.
Yes/no option to enable session reliability.
NOTE:
ThinOS thin clients do not support UDP browsing to obtain a
new conguration about session reliability on the server. The
thin client always connects to the default port.
UniSession={no, yes}
Default is no.
Yes/no option to use a unisession. The connection will launch only
once at a time.
UnmapClipboard={no, yes}
Default is no.
Yes/no option to disable clipboard redirection for an ICA session if
redirecting the clipboard.
UnmapPrinters={no, yes}
Default is no.
Yes/no option to not auto-connect to local printers when the
connection starts.
UnmapSerials={no, yes}
Default is no.
Yes/no option to not auto-connect to local serials when the
connection starts.
UnmapUSB={no, yes}
Default is no.
Yes/no option to not auto-connect to local USB devices (Virtual
USB) when the connection starts.
Username=[username, $SYS_VAR]
Username to log-in to the application server. Either a conventional
login username or a variable can be used. Maximum of 31
characters are allowed.
The value of username is a conventional login username.
The value of $SYS_VAR is a system variable found in Table 1:
System variables.
NOTE:
The combination of all the variables such as $IP@$DN are
also supported.
Username-enc=an encrypted username Species an encrypted string as a username for a connection.
[WyseVDA={no, yes}]
Default is no.
Yes/no option to enable Wyse Virtual Desktop Accelerator for all
ICA sessions.
88 Connect Parameter: Options