Reference Guide
Used here is an option of the Connect statement. It sets the value
of NoReducer only for this specied connection.
NOTE:
By default the ICA protocol compresses the data to minimize
the amount of data that needs to traverse the network. This
compression can be as much as 50 percent for text-based
applications such as Microsoft Word and 40 percent less for
graphics applications than the data streams that are not
compressed.
Password={password, $SYS_VAR}
Password to log-in to the application server. Either a conventional
login password or a variable can be used. Maximum of 19
characters are allowed.
The value of password is a conventional login password.
The value of $SYS_VAR is a system variable found in Table: System
variables.
IMPORTANT:
The application server password is not encrypted; it is
strongly recommended not to specify it. The user will be
prompted to enter the password when the connection is
made. This application server password directive never starts
a line, so it can be distinguished from the thin client user
sign-on password which does starts a line.
NOTE:
The Password option is not written into a {username}.ini le
by a user. When the New Password check box is selected,
the system writes the new, changed password into the
{username}.ini le with encryption. This password is then
checked against the sign-on password with encryption to
determine whether sign-on is successful.
Password-enc=an encrypted password Species an encrypted string as a password for a connection.
Reconnect={no, yes, 1 to 3600 (seconds)} Default is no.
Controls automatic reconnection to an application after a server
disconnection.
yes — Use to restart the connection; the default delay time for yes
reconnect is 20 seconds.
no — Use to prevent reconnection after a disconnect.
1 to 3600 — Use an integer value of 1 to 3600 seconds to restart
the connection after the delay you want. For example, use 50 and
the automatic reconnection to an application will occur after 50
seconds.
Resolution=[default, Seamless, <monitor resolution>] Default is default.
Species the connection display resolution.
default — Starts the connection using the current desktop display
setting with no window frame and border.
Connect Parameter: Options 87