Reference Guide

[UnlockRefresh={yes, no}]
[SCShowCNName={yes,no}]
[SCSecurePINEntry={no, yes}]
[AutoConnectTimeout={10–300}]
[DisableEditDomain={yes, no}]
[AdGroupPrex=adgrpnameprex]
SCRemovalBehavior — Default is 0. Species what happens after
a smart card is removed.
-1 — If smartcard is removed then client has no action. Whether
the session can be used or not totally depend on the server
policVNCD
0 — System logs o.
1 — System locks and can be unlocked only when the same
certicate is used with the smart card.
SaveLastDomainUser — Yes/no option to save the username and
domain into NVRAM once signon is successful. On next reboot, the
username and domain saved in the NVRAM will be displayed in
signon server as the default username and domain if no
DefaultUser is set in the wnos.ini le.
The size of username/domain is limited to 32 characters, and if
larger than 32, it will rst be truncated and then saved into
NVRAM.
DefaultINI — The optional DefaultINI congures a le name which
is in the default folder of the username ini les. If the {username}.ini
is not found, this le will be loaded as default.
IconGroupStyle — The optional IconGroupStyle congures the
icon group style on the desktop. PNAgent published applications
can be congured with the client folder in the PNA server.
If set IconGroupStyle=folder, the PNAgent published applications
which are specied to display on the desktop will display with the
folder.
After clicking the folder icon, the subfolder or applications in this
folder will display on the desktop. In this case, there is an Up to 1
Level icon on top. Clicking the icon will display the up one level
folder contents.
IconGroupLayout — Default is vertical. Congures the direction of
the icongroup on the desktop.
PasswordVariables — Default is no. Yes/no option to support
variable mapping ($TN, $UN etc) for a password.
LockTerminal — Default is yes. Yes/no option to lock the terminal.
If set LockTerminal=no, the function of locking terminal is disabled.
It disables the Lock Terminal from a Right Click on the desktop or
from clicking the Shutdown option > Lock Terminal. It also disables
lock terminal even if set ScreenSaver=minutes; LockTerminal=yes.
ExpireTime — Species the signon expiration time. The range is 0
to 480 minutes. The default is 0 which means no expiration.
If the value is larger than 480, then 480 is set instead. If the value is
smaller than 0, then 0 is set instead.
After system signon or starting a connection, the expiration time
starts counting. Once the expiration time is reached, starting a
connection by clicking the icon, menu or connection manager, will
bring up a pop up message box to enter the password. Only if the
password is same as the original signon password, the session
starts.
If the terminal is locked and unlocked with the password, the signon
expiration time starts counting again.
Parameters for WNOS INI Files Only
35