Reference Guide

RapportDisable={yes, no}
[DHCPinform={yes, no}]
[DNSLookup={yes, no}]
[QuickMode={yes, no}]
[Discover={yes, no}]
[SecurityMode={default, full, warning, low}]
Set to yes to disable the Rapport agent.
If RapportDisable=no, the Rapport agent is enabled and you can
discover the WDM server by the following ways:
1 The DHCP option tag values received from standard or WDM
proxy DHCP service for vendor class RTIAgent
2 DNS service location record "_wdmserver._tcp"
3 DNS host name lookup "wdmserver"
If RapportDisable=no, set DHCPinform=yes to perform the WDM
server discovery as mentioned in number 1; set DNSLookup=yes to
perform the WDM server discovery as mentiomned in number 2
and 3.
If QuickMode=yes is specied, rapport agent will not block any
other process during ThinOS boot up, and boot time of ThinOS will
speed up.
NOTE: If le server is changed by WDM server, device will
reboot automatically to make sure all settings from WDM
server take eect. Default is yes.
Discover— If Discover=yes is specied, rapport discovers the
WDM server information from DHCP option tag, DNS service
location record and DNS host name. If the WDM server is
discovered, the WDM server User Interface (UI) is protected on the
device. The default value is yes.
SecurityMode species the SSL certication validation policy. If set
to default, SecurityPolicy setting is applied.
If set to full, the SSL connection needs to verify server certicate.
If it is untrusted, drop the connection.
If set to warning, the SSL connection needs to verify server
certicate. If it is untrusted, it is up to you to continue or drop the
connection.
If set to low, the server certicate is not checked. The value is
persistent, and the default value of the setting is default.
If the settings are factory default or if you are upgrading to ThinOS
8.3 for the rst time, the value is temporarily set to low. After
loading any INI, it goes to Default value.
RapportServer=server_list
[Retry=]
IMPORTANT:
DISCONTINUED. DO NOT USE. Use WDMServer
parameter, see WDMServer=<server_list> in Table 4:
Connection Settings for wnos.ini Files Only.
Reboot | shutdown={no, yes} Time=hh:mm
[-hh:mm]
[Wday={Sunday, Monday, Tuesday, Wednesday, Thursday, Friday,
Saturday}]
[Idle=minutes]
Reboot — Yes/no option to enable automatic daily reboot of all
ThinOS devices.
Time — Species the time to reboot and must be in a 24-hour
format. For example: Reboot=Yes Time=17:30 will reboot all ThinOS
devices at 5:30 P.M. daily.
If you set time as hh:mm-hh:mm, a random time during the
congured time period is selected.
Wday— The option Wday species the week day of scheduled
reboot.
Parameters for WNOS INI Files Only 31