Release Notes

Parameters Description
[VUSB_VIDEO={yes, no}]
[VUSB_PRINTER={yes, no}]
[FullScreen={no, yes}]
[Resolution={default, vga_resolution}]
[DisableResetVM={no, yes}]
[WyseVDAServerPort=serverPort]
[FontSmoothing={yes, no}]
[AutoConnect={yes, no}]
[MultiMonitor={yes, no}]
[EnableImprivataVC={yes,no}]
[Locale=LocaleID]
[SessionLogoTimeout=seconds]
[GroupSession={yes,no}]
* [OnDesktop={default, all, none, desktops, applications,
ondesktop_list}
1
The port range is a list of start port and end port separated by
a semicolon (;) or a comma (,).
2 Both ports must be between 1 and 65535.
3 The end port must be greater than start port.
For example, WyseVDA_PortRange=3000,3010, the start port is
3000, the end port is 3010.
UnmapClipboard—Default is no. Yes/no option to disable clipboard
redirection for all sessions. For ICA and RDP, species if redirecting
the clipboard. This setting in wnos.ini are saved into nvram, if
EnableLocal parameter is set to yes in wnos.ini.
DefaultColor—Species the default color depth to use for the
session 0=256, 1=High color, 2=True Color.
VUSB_DISKS, VUSB_AUDIO, VUSB_VIDEO, and
VUSB_PRINTER—Default no. Species if these USB devices are
redirected to the server using TCX Virtual USB or ICA or RDP USB
redirection. By default, these devices are set as local devices.
NOTE: For example, if you want to use USB disks as a
network disk, you can set SessionCong=all
mapdisks=yes VUSB_DISKS=no.
If you want to use USB disks as server side device, you can
set SessionCong=all mapdisks=no VUSB_DISKS=yes. The
devices are displayed in device manager of the session.
FullScreen—Default is no. Species the default screen mode.
When you use FullScreen in a Dual Screen mode, the session is
displayed in span mode
Resolution—Default is default. Species the session resolution.
For example, 640 x 480 and other supported resolutions.
Default sets the resolution to the native resolution of the monitor.
Setting the resolution to a value smaller than the native resolution
of the monitor, allows the session in Windowed mode. The
resolution value cannot be higher than the native resolution.
DisableResetVM—Default is no. Set DisableResetVM=yes to
disable reset VM function. As default, this function is controlled by
the server side is enabled including VMware View or Citrix PNA.
WyseVDAServerPort—Sets Wyse VDA Server Port for a ThinOS
VDA client. The default port is 3471. The port range must be from
1029 to 40000. For example, WyseVDAServerPort=3000, sets VDA
server port to 3000 and the client connects to the VDA server
using this port.
FontSmoothing—Default is yes. Set no to disable font smoothing.
AutoConnect—Default is yes. Set no to disable Auto Connect
function.
MultiMonitor—Default is yes. Sets a multiple monitor layout. Set
MultiMonitor=no to disable multiple monitor layout functions. The
session has the same desktop width and height with local virtual
desktop size, spanning across multiple monitors, if necessary.
EnableImprivataVC—Default is yes. If set to no, the Imprivata
Virtual Channel is disabled. The user can use vusb redirect instead
of Imprivata Virtual Channel mode to use the Rdeas or nger print
device in session as server side remote device.
82
ThinOS 8.5_012 and ThinOS Lite 2.5_012