Release Notes

INI parameters Description
*[SCRemovalBehavior= {none or -1, logo
or 0, lock or 1, killsessions or 2}]
The user must be a domain user, and the same sign-on user credentials must be available
in the ftp://~/wnos/ini/directory.
Set SCRemovalBehavior=killsessions can be used along with the AutoSigno parameter.
Device=vusb
*[TCXDVCdefault={yes, no}]
The default value is no. Set yes for RDP to establish the rst connection faster when USB
device is redirected.
Privilege=None
TCPTosDscp=[Default/CS1/CS2/CS3/CS4
/CS5/CS6/CS7/AF11/AF12/AF13/AF22/
AF23/AF31/AF32/AF33/AF42/AF43/EF]
UDPTosDscp=[Default/CS1/CS2/CS3/CS4
/CS5/CS6/CS7/AF11/AF12/AF13/AF22/
AF23/AF31/AF32/AF33/AF42/AF43/EF]
TCPTosDscp: Use this option to set the TOS eld of all TCP packets when the elds are
not pre-congured by other INI settings.
UDPTosDscp: Use this option to set the TOS eld of all UDP packets when the elds are
not pre-congured by other INI settings.
Added new sheet TOS_Priority_settings for TosDSCP INI, which is merged from
TOS_Priority_settings.docx. For more information, see TOS priority settings for TosDSCP
INI.
SecurityPolicy={full, warning, low}
*[TLSCheckCN=[yes, no]]
Species the global security mode for SSL connection. If application SecurityMode is
default, application applies the setting.
If set to full, the SSL connection must verify server certicate. If it is untrusted,
connection is dropped. If set to warning, the SSL connection musts verify server
certicate. If it is untrusted, it is up to you to continue or drop the connection. If set to low,
the server certicate is not checked.
The value is persistent, and the default value is warning. For those SSL connections with
their own security policy, this does not impact.
For example,
• File server with https protocol has its own security mode (Full, Warning and None), the
default is Full.
• VMware View and AWS broker have its own security mode (Full, Warning and None),
the default is Warning.
• Citrix broker, RDS broker, and SECUREMATRIX force to high security mode
The option TLSCheckCN enables/disables the ThinOS client to check server certicate
common name when connecting to SSL in full security mode. This option does not eect
the SSL connections of VMware View, Amazon Workspaces, and VPN. These three
connections checks server certicate common names all the time. The default value is
changed to yes from build version 8.5_106.
NOTE: Use NetBIOS or FQDN values to dene an SSL (Https) connection when
enabling TLSCheckCN option (TLSCheckCN=yes), enabling TLSCheckCN
results in SSL connection failure (SignOn failures) when an IP address is dened.
*Device=mouse[Speed=[1-9]]
[Swap={yes, no}]
[FlipFlopWheel={yes, no}]
[Big={yes, no}]
The Speed is used to congure mouse's moving speed. 1 is the slowest, 9 is the fastest.
The default value is 6. This parameter is the replacement of MouseSpeed. If Swap=yes is
set, right button is set as primary button. The default value is no.
Set MouseFlipFlopWheel=yes to invert the mouse scroll wheel, the default value is no.
If Big=yes is set, the size of local mouse pointer is increased by two times. The default
value is no. This is designed for Wyse 5070 thin client only.
Dualhead=[yes, no]
*[ManualOverride=[yes, no]]
*[Taskbar=["wholescreen", "mainscreen"]]
Dualhead parameter is applicable for Wyse 5070 thin client.
If ManualOverride=yes, all the parameters are only valid in factory default. It allows you to
congure display setting manually if both single monitor and a dual monitor exist in an
environment. This is not applicable for Wyse 5070 thin client.
46 ThinOS 8.5_107