Setup Guide

Table 9. Connection Settings: wnos.ini files, {username} INI, and $MAC INI files (continued)
authentication will be selected. If set to ShareKey, shared key
authentication will be selected.
DisableBand — Default is None. Use to disable 2.4G or 5G
802.11 band.
PreferBand —This parameter is used to set the priority of
wireless connection band, and select the 2.4G or 5G access
point to connect. Default is None.
Priority — sets the priority of wireless profiles. The ssid list
is separated by a semicolon or comma and the priority is from
high to low.
DisableN — Default is no. Yes/no option to disable 802.11n
Wi-Fi wireless networking.
DisableWlan— Used to disable the wireless connection. If
DisableWlan=EnetUp, and the Ethernet is on while booting,
the wireless connection is disabled.
Device=Wireless Mode=Infrastructure
SSID=ThinIsIn
IEEE8021X=yes network=wireless
profile=ThinIsIn access=WPA2-ENT
eap=yes eaptype=EAP-PEAP peapeap=EAP-
MSCHAPV2
Device=Wireless Mode=Infrastructure
SSID=wtos_95 roamsensitive=high
IEEE8021X=yes network=wireless
profile=wtos_95 access=WPA2-ENT
eap=yes eaptype=EAP-PEAP peapeap=EAP-
MSCHAPV2
Device=Wireless Mode=Infrastructure
SSID=wtos_11n
IEEE8021X=yes network=wireless
profile=wtos_11n access=WPA2-PSK
wpa2pskpwd=2wsx3edc
Device=Wireless
Priority="wtos_11n,wtos_95,ThinIsIn"
DISABLETSGW
NOTE: DISCONTINUED. DO NOT USE. See
TSGWENABLE
**EnableLocal={no, yes}
[HideDefault={no, yes}]
Default is no.
Yes/no option to enable locally configured entries to show
in the Connect Manager list. When connections defined in
local NV-RAM are displayed in the Connect Manager, they are
marked with an asterisk.
If EnableLocal=yes is in a wnos.ini file, then the global
information will be saved into NVRAM.
NOTE: The global information includes: SEAMLESS,
ALTERNATE, Reconnect, icaBrowsing, LowBand,
NoReducer, Time settings, and Printer settings in a
wnos.ini file.
HideDefault — Default is no. Yes/no option to hide the
default ICA and RDP connections that are present on the
devices.
ENABLETSGWSAMEINFO
NOTE: DISCONTINUED. DO NOT USE.
*EthernetSpeed={Auto, 10M HD, 10M FD, 100M HD, 100M
FD, 1000M}
Default is auto.
Parameters for wnos INI, {username} INI, and $MAC INI files 69