Setup Guide

Table 6. Connection Settings: wnos.ini files only (continued)
SFZeroButtons—The option keyword SFZeroButtons. if set
to yes, displays the buttons (shutdown, login and so on) at
the bottom of signon window, such as Zero mode when set
StoreFront style.
SignonStatusColor—The option specifies the signon status
text color in RGB string format (must be enclosed in quotes),
where rrr, ggg, and bbb are decimal numbers in the range of 0
to 255. By default, the status text color is gray for ThinOS.
Speedbrowser={on, off}
Default is on.
On/off option to enable the ICA Speedscreen Browser
Acceleration Function.
SwitchApplication
NOTE: DISCONTINUED. DO NOT USE.
SysMode={classic, vdi, VMware, Citrix}
[toolbardisable={no, yes}]
[toolbardisablemouse={
no, yes}]
[toolbarclick={no, yes}]
[toolbardelay={0-4}]
[toolbar_no_conmgr={no, yes}]
[toolbar_no_minimizeall={
no, yes}]
[toolbardisablehotkey={no, yes}]
[ToolbarEnableOneSession={no, yes}]
[ToolbarAutoQuit={
yes, no}]
[ToolbarStay={1~20}]
[EnableLogonMainMenu={no, yes}}
SysMode — Specifies the Zero interface optimized for VDI
or the Classic interface. This value will be remembered across
reboots until changed. If not defined and an INI is present,
Classic mode is the default. If no INI is present, VDI mode is
the default.
Classic mode has full taskbar, desktop and connection
manager and is recommended for a terminal server
environment and for backward compatibility with WTOS 6.x.
VDI mode (Zero interface) has a new launchpad-style
interface optimized for full-screen sessions that is Desktops.
Everything you need is accessed through an always available
overlay interface.
VMware mode looks similar to VDI mode but only allows
VMware horizon broker. Login window and wallpaper is
specific to horizon.
Citrix mode makes the client turn to Xenith. Xen.ini is prefered
in the next reboot.
NOTE: VMware mode and Citrix mode can only be used
under wnos.ini. ZeroTheme is the alias for SysMode. You
can also use ZeroTheme=xxx in wnos.ini.
The following options allow you to configure only when the
Zero toolbar displays under VDI mode:
Toolbardisable — Default is no. Yes/no option to disable
the Zero toolbar from displaying; if set to yes, this option
overrules other toolbar display options.
Toolbardisablemouse — Default is no. Yes/no option to
disable the Zero toolbar from automatically displaying once
you pause the mouse pointer on the left side of the screen for
a specified amount of time.
toolbarclick — Default is no. Yes/no option to pop up the
toolbar only if clicking on the left-most side of the screen.
toolbardelay — Specifies the seconds to delay before
displaying the toolbar after pausing the mouse pointer on the
left-most side of the screen. The value 0 will have no delay.
The other values 1, 2, 3,4 will delay 0.5, 1, 1.5 and 2 seconds
respectively.
toolbar_no_conmgr — Default is no. Yes/no option to hide
the Home button.
Parameters for wnos INI files only
39