Setup Guide

Table 6. Connection Settings: wnos.ini files only (continued)
If Combined=yes, then the DNS server will combine the DNS
server configured by DHCP and the static one. DNS domain
will use the value configured by DHCP if static DNS domain is
empty.
DNSTTL={0-3600}
Specifies the Time to Live (TTL) of DNS name caching; the
default is from DNS server settings.
NOTE:
If DNSTTL=0, the DNS hostname in a connection always
queries the DNS server to get the IP.
DomainList=List of NT domain names
[disable={yes/no}]
A list of domain names that will appear in the thin client Sign-
on dialog box as options to help users in selecting the domain
to sign-on to PNAgent/PNLite servers. Once specified, it is
saved in non-volatile memory.
NOTE:
Be sure to enclose in quotation marks if spaces are
included. For example: DomainList=North_America, SQA,
test-domain.
disable— If the value is set to yes, the domain field in sign-on
window is disabled.
Dualhead={no, yes}
[ManualOverride={no, yes}]
[Mainscreen={1, 2}]
[Orientation={
hort, vert}]
[Align={Top|Left, Center, Bottom|Right}]
[Taskbar={wholescreen, mainscreen}]
[MonitorAutoDetect={yes,no}]
[Swap={
no, yes}]
[EnsureDpIsOn ={yes, no}]
Default is no.
Dualhead — Yes/no option to support a dual-monitor display.
Default no sets monitors to mirror mode; yes sets monitors to
span mode.
ManualOverride — Default is no. Yes/no option to allow the
local client to override display dualhead settings received from
central configuration.
If reset to factory defaults, it will once again take server
settings for dualhead. This is helpful for scenarios where you
have a mixture of dual head and single head deployments.
For example:
Dualhead=yes
ManualOverride=yes
Mainscreen=1\Orientation=hort
Taskbar=mainscreen
NOTE:
If using, be sure the ManualOverride option is the first
option used after the Dualhead parameter position in the
statement.
Mainscreen — Sets which screen is used as the main screen.
When using a DVI to DVI and VGA cable, the DVI connected
monitor will be the default mainscreen=1.
Orientation — Default is hort. Sets which style is used for
display. Hort means horizontal and vert means vertical.
Align — Sets how screens are aligned: Top means screens
are top aligned in hort orientation. Left means screens are left
aligned in vert orientation.
Center means screens are center aligned. Bottom means
screens are bottom aligned in hort orientation. Right means
screen are right aligned in vert orientation.
24
Parameters for wnos INI files only