Administrator Guide

If the Login User name, Password, and Domain name boxes are not populated, you can enter the information manually in
the ICA server login screen when the connection is made:
● Login Username—Maximum of 31 characters is allowed.
● Password—Maximum of 19 characters is allowed.
● Domain Name — Maximum of 31 characters is allowed.
● Logon Mode — Select User-specified credentials, Smart Card, or Local User.
b. Start Command area—Server Connection Option Only — This area is disabled for a Published Application option.
Application (127 characters maximum) and Working Directory (63 characters maximum)—Enter an initialization string
and arguments, including an associated working directory, that you want to start automatically on the server when the
connection is made.
6. Click Options tab and use the following guidelines:
Figure 5. Default ICA—Options
a. Autoconnect to local devices—Select any options (Printers, Serials, USB, Smart Cards, and Disks) to have the thin
client automatically connect to the devices.
b. Allow font smoothing—When selected, enables font smoothing (smooth type).
c. Optimize for low speed link—When selected, allows optimization for low-speed connections, such as reducing audio
quality and/or decreasing protocol-specific cache size. Intended for a connection spanning a WAN link or using dialup.
d. Enable session reliability—When enabled, session reliability allows a user to momentarily lose connection to the server
without having to re-authenticate upon regaining a connection. Instead of a user’s connection timing out after X seconds,
the session is kept alive on the server and is made available to the client upon regaining connectivity. Session reliability is
most relevant for wireless devices.
ICA Self Service Password Reset
You can do reset the password or unlock the account after you complete the security questions enrollment.
Supported Environment
● XenDesktop 7.11 and later versions
● Support Storefront server 3.7 and later versions
Configuring the connection brokers
73