Setup Guide

Timeout — Species the time in seconds where a client will try to
establish a connection before reporting that it is unreachable.
CAGRSAAuthMethod or CAGAuthMethod — CAGAuthMethod
option is used for CAG authentication conguration.
NOTE: This option replaces CAGRSAAuthMethod. If
CAGAuthMethod=RSA which is same as the prior
CAGRSAAuthMethod=RSASecurid, an extra passcode
eld needs to be input except username/password/
domain. If CAGAuthMethod=LDAP, no passcode eld is
needed.
• CAGAuthMethod={LDAP+RSA, RSA+LDAP} — Used for CAG
authentication conguration.
• If CAGAuthMethod = LDAP+RSA, an extra passcode eld
needs to be input except username/password/domain. If the
CAG server is congured for a double authentication policy, this
ini corresponds to the rst auth LDAP and second auth RSA.
• If CAGAuthMethod = RSA+LDAP, it has the same result with
CAGAuthMethod = RSA, compared to LDAP+RSA. If CAG
server congure double authentication policy, this ini
correspond to First auth RSA and Second auth LDAP.
RequestIconDataCount — RequestIconDataCount is used for
requesting 32-bit color icons. It is a counter which means that only
the count of the icons will be requested. The default number is 10.
For example, if set RequestIconDataCount=0, no icon data will be
requested. If set RequestIconDataCount=5, only 5 icons are
requested.
DefaultSettings — Species the default settings for XenApp or
XenDesktop.
Xen App Default Settings:
1 SignOn=Yes
2 PnliteServer= RequestIconDataCount=20
3 desktopcolordepth=32
4 LongApplicationName=yes
5 sessioncong=ica progressivedisplay=yes ondesktop=yes
6 device=audio volume=high
7 Seamless=yes FullscreenReserved=yes
8 sessioncong=all mapdisks=yes
9 Enabled by default: Disks, Serials, Sound
10 Disabled by default: USB, Printers, Smart Cards
Xen Desktop Default Settings:
1 SignOn=Yes
2 sysmode=vdi toolbarclick=yes toolbardelay=3
3 sessioncong=ica progressivedisplay=yes
4 PnliteServer=
5 AutoSigno=yes
6 Enable by default: Printers, Serials, USB, Sound
7 Disabled by default: Disk, Smart Cards
SmartcardPassthrough — Default is yes. Yes/no option to enable/
disable the smartcard pass through mode.
Parameters for wnos INI, {username} INI, and $MAC INI
les 79