Setup Guide

When using this parameter in a wnos.ini le, it will be saved to NVRAM if EnableLocal is
set to yes in the wnos.ini le.
EnablePrinterSettings — Default isno. Yes/no option to enable printer congurations
when a user Privilege=None.
CoreDump — The option CoreDump=disabled will disable the core dump function.
EnableNetworkSetup — This option is used to enable and disable the network setup.
DisableNetworkOptions — This option is used to enable and disable the network
options.
EnableSystemPreferences —If the optional parameter,
EnableSystemPreferences=TerminalNameOnly is set with Privilege=none, then the
System Preferences menu is enabled, and only Terminal Name eld can be accessed.
DisableTerminalName— This option is used to enable and disable the terminal name.
DisableSerial — This option is used to enable and disable the serial table in peripherals.
DisableRotate — If the optional DisableRotate=yes is set, the rotate setting in the
display setup will be disabled. This is only valid for C class clients because the rotation
performance in C class may not be desirable.
NOTE:
If the optional EnableNetworkSetup=yes is set with Privilege={none, low}, the
network setup will be enabled.
If the optional DisableNetworkOptions=yes is set at the same time, the Options
table will be disabled.
If the optional EnableSystemPreferences=yes is set with Privilege={none, low},
the system preferences setup will be enabled.
If the optional DisableTerminalName=yes is set at the same time, the terminal
name eld will be disabled.
If the optional DisableSerial=yes is set with Privilege={none, low}, the serial table
in peripherals setup will be enabled.
DisableChangeDateTime
— If the optional DisableChangeDateTime is set, the
function of changing date and time locally will be disabled. For example, if you right-
click the time label in taskbar, nothing is displayed. The Change Date and Time button
in System Preference will be invisible.
EnableVPNManager—If the optional EnableVPNManager=yes is set with
Privilege={none, low}, the VPN Manager setup is enabled.
TrapReboot— If the optional TrapReboot=yes is set, client reboots after the execution
of the trap.
EnableCancel— If the optional EnableCancel=yes is set with Privilege={none, low},
the counter down window for reboot or shutdown can be cancelled. The default value
is no.
For example, set the following ini,
Inactive=1
AutoSigno=yes Shutdown=yes
ShutdownCounter=30
Privilege=none EnableCancel=yes.
Parameters for wnos INI, {username} INI, and $MAC INI
les 57