Setup Guide

not set, all the applications and desktops are displayed. To get your
RemoteApp or desktops collection name, do the following:
1 In RDS Server local, go to C:\Users\administrator.RDSS
\AppData\Roaming\Microsoft\Workspaces\{xxxx}\Resource,
and check that all your published collection (.rdp le) are
listed.
2 Open the specify .rdp le which you want to dene in .ini le
with notepad and get the collection name from line
"loadbalanceinfo:s:tsv://MS Terminal
Services Plugin.1.[collection name]".
DisableShowDisclaimer=yes—The option is set to yes to disable
popup/pre-logon message and automatically accept them without
intervention when broker type is VMware View. The default value is
no.
DisableShowServer=yes—The option is set to yes to disable
showing the view server URL in sign-on window and disclaimer
window when broker type is VMware View. The default value is no.
DelCerticate={lename, all, builtin}
lename — Removes the named le from the nand ash or from
the memory.
all — Removes all certicates except built-in certicates included
by default.
builtin — Removes all certicates including the public certicates
included by default.
DesktopColorDepth={16, 32}
[RGB565={no, yes}]
DesktopColorDepth — Sets the desktop color to 16 or 32 bits. If
DesktopColorDepth=16, the default color is 15 bits.
RGB565 — Default isno. Applies only if the desktop color is using
16 bits.
IMPORTANT:
If the RBG565 parameter value is changed to yes, the thin
client will require a reboot.
DHCPExpire={reboot, shutdown}
Default is reboot.
When a DHCP lease expires, a message noties the user as follows:
DHCP Expired, you must reboot.
reboot — After 5 seconds, the system reboots.
shutdown — After 5 seconds, the system shuts down.
DHCPOptionsRemap={no, yes}
[DisableOption12={no, yes}]
[FileServer={128 to 254}]
[RootPath={128 to 254}]
[FtpUserName={128 to 254}]
[FtpPassWord={128 to 254}]
[RapportServer={128-254}]
[RapportPort={128-254}]
Default is no.
DHCPOptionsRemap — Species whether or not the following
options can be set.
The value for each option must be from 128 to 254. Values for the
options must be dierent for each option. These options are used
to congure DHCP server tags for thin client booting.
The option DisableOption12 sets if the option tag 12 in DHCP is
accepted or not. As default, DHCP option 12 sets the hostname
and domain name of the terminal. For example, the information of
option 12 is terminal name.wyse.com, the terminal name will be set
as terminalname and the domain name will be set as wyse.com.
Parameters for wnos INI les only 23