Administrator Guide

• Wyse 3010 thin client with ThinOS and Wyse 3020 thin client with ThinOS are not supported.
• In Wyse 3030 LT thin client with ThinOS, set the DP audio as the default audio device to use DP audio in a session. Else, the DP audio
will not available in the session.
• Citrix multiple audio feature does not work with HDX generic audio. The resolution for the issue will be delivered in the next ThinOS
release.
Using Citrix NetScaler with CensorNet MFA authentication
SMS PASSCODE is re-branded as CensorNet MFA. You can congure NetScaler Gateway to use a One Time Passcode/Password (OTP)
in the form of a personal identication number (PIN) or passcode. To obtain this one-time password, you must install CensorNet app on
your mobile. After you enter the passcode or PIN, the authentication server invalidates the one-time password. You cannot enter the same
PIN or password again. For more information about conguring one-time passcode, see the
Citrix documentation.
Prerequisites
• NetScaler v12.0 and later is installed on your client.
• SMS PASSCODE v9.0 SP1 is installed and congured in your network. You can download the SMS PASSCODE v9.0 le from
download.smspasscode.com/public/6260/SmsPasscode-900sp1.
• Remote Authentication Dial-In User Service (RADIUS) authentication policy is congured and bind to the NetScaler gateway server.
• CensorNet app is installed and congured on your mobile device.
To use the one-time passcode on ThinOS, do the following:
1 Log in to ThinOS, and connect to the NetScalar Gateway URL.
2 Enter your credentials (user ID and password), and press Enter.
The PASSCODE dialog box is displayed. You will receive a push notication from the CensorNet App on your phone with the code.
Conguring
the connection brokers 71