Administrator Guide
Attribute Value
Mode Optimized
You can also view the Citrix HDX RealTime Connector for Microsoft Lync 2013 version and Citrix HDX RealTime Media Engine
version in the dialog box.
3 Click the Audio Device tab to congure the RTME audio settings, such as speakers, microphone, and ringer settings.
NOTE: The RTME audio device on ThinOS shows only one device from ThinOS local playback device. It can actually
work the way they are congured at ThinOS local playback device and record device. The RTME audio device for
ringtone is limited to use ThinOS local playback device. This is a known Issue.
4 Click the Video Device tab to congure the RTME video settings. From the drop-down list, select the webcam that you want to use
for video calls.
5 Click the Call Forwarding tab to congure the call forwarding settings.
You can congure the following options:
• Turn o call forwarding
• Forward any call to a specic number
• Simultaneously ring
NOTE: The latest call forwarding settings congured by you are displayed in the lower pane of the dialog box.
For more information about trouble shooting, go to docs.citrix.com/en-us/hdx-optimization/1-8/hdx-realtime-optimization-pack-
troubleshooting.html.
Known Issues with RTME 1.8 feature
• RTME operation system on ThinOS is displayed as Linux.
• The RTME 1.8 feature on ThinOS does not work with other versions of HDX RealTime connector due to known Citrix limitation.
• If you change the audio device during an RTME call, the audio input or output might stop responding.
• In a video conference call, when dierent user is speaking, the on-screen video switches to the active user, but takes a few seconds to
switch over.
Tested devices—For information about the tested devices for RTME, see the latest Dell Wyse ThinOS release Notes.
Verifying the RTME 2.x status
This section describes the working of RTME 2.x and how to verify the RTME status.
Salient features
• Native Skype For Business client menus and operations are available.
• Better initialization eliminates DNS confusions.
• Supports more call features, such as call delegation, and response group.
• Supports video codec H.264-UC, and audio codec SILK introduced by RTME 2.1.
• Call Admission Control support
• Bandwidth Policy Control
• DSCP/ QoS Conguration
• Ability to turn o version mismatch warnings for acceptable combinations of RealTime Connector and RealTime Media Engine.
To verify the RTME status, do the following:
1 Install the correct connector on the remote desktop.
2 Install the correct package on the ThinOS device.
3 Connect the audio or video devices.
NOTE
: USB redirection needs to be disabled for audio or video devices.
Conguring the connection brokers 67