Manualshelf

Administrator Guide

ManualsBrandsDell ManualsConverged InfrastructureWyse 5010 Thin Clients / D10D/D10DP/D90D7
175176177178179180181182183184
packages. It depends on the value of LoadPkg. For more information about the INI parameter usage, see Dell Wyse ThinOS INI
Reference Guide.
5 Save the wnos.ini le.
6 On the ThinOS client desktop, navigate to System Setup > Central Conguration > General.
7 In the General tab, enter the IP address of the le server or directory. For example: https://IPaddress/wyse.
NOTE: You can also use DHCP option tags 161 and 162 to congure the ThinOS client, le server and path information.
You must create these options on your DHCP server, congure them with the correct server information, and enable the
DHCP server scope in your environment.
8 Click OK.
9 Restart the thin client and wait until the auto-installation of packages is complete.
Firmware upgrade using Wyse Management Suite
version 1.1
Ensure that you have created a custom group and assigned the ThinOS devices to that group in Wyse Management Suite—see Wyse
Management Suite v1.1 Administrator's Guide.
Ensure that your ThinOS clients are registered to Wyse Management Suite. See, Conguring the WDA settings.
To upgrade the ThinOS rmware using Wyse Management Suite:
1 Go to www.dell.com/support.
2 Download the latest ThinOS rmware and ThinOS packages that corresponds to your thin client model.
3 Log in to Wyse Management Suite using valid credentials.
4 On the Apps & Data page, in the OS Image Repository section, click ThinOS.
5 Click Add Firmware File.
The Add File dialog box is displayed.
6 Browse and select the downloaded rmware le. Enter an appropriate description.
7 Click Upload.
The ThinOS rmware le is uploaded, and the rmware le is listed on the Apps & Data - ThinOS OS Image Repository page.
8 Select the check box that corresponds to your ThinOS rmware le.
9 On the Groups & Congs page, select a custom group, and click Edit Policies > ThinOS.
The Select ThinOS Conguration Mode screen is displayed.
10 Click Advanced Conguration.
11 In the Device Conguration pane, click Firmware Upgrade, and then click Congure this item.
12 From the Platform type drop-down list, select your thin client model.
13 From the Firmware to auto deploy drop-down list, select the rmware le that corresponds to your thin client model.
14 Click Save & Publish.
The thin client restarts, and the rmware version is upgraded.
Firmware upgrade
183