Administrator Guide

• Boot up unit without monitor or with monitor power-o.
– Wyse 5010 thin client, Wyse 5040 thin client, Wyse 7010 thin client, and Wyse 3030 LT thin client: If the thin client waits for 15 to
20 seconds and the monitor is attached or powered on within 20 seconds, the display is turned on. If the monitor is attached or
powered on after 20 seconds, the monitor displays the black screen. Turn on the monitor rst, and then turn on the thin client.
– Wyse 3040 thin client and Wyse 5060 thin client: The client waits until the monitor is attached or turned on.
Troubleshooting 179