Release Notes

To exit First Boot Wizard
To exit First Boot Wizard, follow these steps:
 Select Exit at right bottom corner on the following screens:
o USB config load failure
o System Preference
o Ethernet
 Select OK or Done on the following screens:
o Read USB configuration success
o Management Configuration
o Connection Broker
 Press Ctrl+Esc during network connection. You also press Ctrl+Esc on the Welcome screen
to exit First Boot Wizard.
Screen usage and tips
 This wizard is initiated for new units from factory or after factory default reset.
 German localization is included in the standard image. The Japanese translation is
included in the Japanese image. For including other languages work with MSG file and
INI.
 The Welcome screen displays the thin client unit model.
 Loading the USB configuration searches for configuration files such as wnos.ini and so on
in USB /wnos directory.
o All configuration files can be loaded except for firmware and package update