Release Notes

Reference Description
[Display = {yes, no}] Display—If set to yes, the username eld in sign-on window will
be displayed. By default the value is set to no and the eld will
be obscured with asterisks (*).
CCMEnable = {yes, no}
[IgnoreMqtt = (yes, no)]
[CCMServer=server_address[:port]]
CCMEnable — Yes/no option to enable the Cloud Client Manager
Agent. It species an IP address or URL address for the CCM
server. Default port is 80. Once specied, it is saved in the non-
volatile memory.
IgnoreMqtt—If IgnoreMqtt=yes is specied, CCM agent will not
connect to MQTT server. Default value is no.
CCMServer — Species an IP address or URL address for the
CCM server. Default protocol is HTTPS if "http://" or "https://"
is not available. Default port is 443. Once specied, it is saved in
the non-volatile memory. Example: CCMEnable=yes
CCMServer=http://xxx:8080
WDAService= yes
[interval = {0-65535}]
[disableNotice={yes, no}]
[disableCancel={yes, no}]
[noticeTime={0-255}]
WDA Service always runs in the background. If priority is available,
WDA discovers the protocol according to it.
interval—If interval is available, WDA rediscovery delay after a
failed check-in (both CCM and WDM failed) is changed to
interval minutes. The default value is 0. (WDA rediscovery delay
is 24 hours).
For example, if you set WDAService=yes interval=30, WDA
rediscovery delay is set as 30 minutes.
disableNotice—If option is set to yes, then count down prompt
will not show when conguration from WDM is received. The
default value is no.
disableCancel—If option is set to yes, there is no possibility to
cancel count down prompt for WDM (device is going to reboot).
noticeTime—If noticeTime is available, the time of countdown
prompt is changed to seconds. Default value is 20.
For example: WDAService=yes disableNotice=no
disableCancel=yes noticeTime=0. In this scenario, count down
prompt is displayed if WDM conguration is received, but you
are not allowed to cancel system reboot, and amount time of
count down prompt is set to default value (20 seconds).
ScreenSaver=value
Value Delay Before Starting
0 Disabled
1 1 Minute
3 3 Minutes
5 5 Minutes
10 10 Minutes
15 15 Minutes
Dell Wyse ThinOS Version 8.4
Release Notes
21