Install Guide

16 Chapter 5
Figure 15 Update firmware options - Windows Embedded Standard 7 example
4. Depending on the operating system of the firmware (from "Step 1: Download and
Ready the Firmware You Require") that you will be pushing onto the target devices
(containing your upgraded flash), select one of the following OS type options:
• D90DW, X90mw, Z90DW, and Z90SW Only - Windows Embedded Standard
• D90D7, X90m7, Z90D7, and Z90S7 Only - Windows Embedded Standard 7
5. Select the Update or Push Firmware operation to perform option. Be sure that all
three contents options are selected (OS Image, BIOS, and CMOS). Leave the
default-unselected Create data partition check box. Leave the default-selected
Preserve data partition check box.
6. Click Next to open the browse dialog box.
Figure 16 Browse for image file
7. Click Browse.