Install Guide

5 Installing Firmware

This chapter includes the requirements and procedures you need to install and use Wyse

USB Firmware Tool

to update your thin client to the firmware you need.

TIP: The purpose of the Wyse USB Firmware Tool is to configure a bootable USB key for

device firmware. In the following procedures, you will create a configured USB key

containing the firmware contents that you need, and then boot from this configured USB

key on appropriate product and flash size devices to push the contents of the USB key

onto these target devices (containing your upgraded flash).

Requirements

• Machine with a minimum of 16GB of free space running either of the following:

• Windows 2003 Server

• Windows Server 2008

• Windows Server 2008 R2

• Windows 7 Enterprise (32-bit and 64-bit)

• Windows 7 Ultimate (32-bit and 64-bit)

• USB Key:

· USB 2.0 only

· USB key size should be 16 GB (see also "USB Keys - Troubleshooting Boot

Issues")

CAUTION: During the USB key configuration process the USB key will be reformatted.