Deployment Guide

Table 9. Connection Settings: wnos.ini files, {username} INI, and $MAC INI files (continued)
Parameter
* Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description
For example, if set RequestIconDataCount=0, no icon data will
be requested. If set RequestIconDataCount=5, only 5 icons
are requested.
DefaultSettings — Specifies the default settings for XenApp
or XenDesktop.
Xen App Default Settings:
1. SignOn=Yes
2. PnliteServer= RequestIconDataCount=20
3. desktopcolordepth=32
4. LongApplicationName=yes
5. sessionconfig=ica ondesktop=yes
6. device=audio volume=high
7. Seamless=yes FullscreenReserved=yes
8. sessionconfig=all mapdisks=yes
9. Enabled by default: Disks, Serials, Sound
10. Disabled by default: USB, Printers, Smart Cards
Xen Desktop Default Settings:
1. SignOn=Yes
2. sysmode=vdi toolbarclick=yes toolbardelay=3
3. sessionconfig=ica
4. PnliteServer=
5. AutoSignoff=yes
6. Enable by default: Printers, Serials, USB, Sound
7. Disabled by default: Disk, Smart Cards
SmartcardPassthrough — Default is yes. Yes/no option to
enable/disable the smartcard pass through mode.
StoreFront — Default is no. Yes/no option to support
Citrix StoreFront Authentication. The value will be saved into
NVRAM.
HttpUserAgent—The option will replace the default
“CitrixReceiver WTOS/1.0” during Netscaler login. If you are
using “WTOS/1.0” as Netscaler Session Policy, set this INI
parameter to retain your Netscaler policy configuration.
CAGSendDomain—This option sends domain as domain\user
to external network Netscaler to support Netscaler and DUO
passcode authentication. The default value is no.
SFIconSortMode sorts storefront dekstop icon. The default
value is 0.
0— sorts by the position value from server side.
1—sorts in alphabetic order.
2—sorts in alphabetic order with desktop first.
80
Parameters for wnos INI, {username} INI, and $MAC INI files