Deployment Guide

Table 6. Connection Settings: wnos.ini files only (continued)
Parameter Description
Dualhead=yes ManualOverride=yes
Mainscreen=1\Orientation=hort
Taskbar=mainscreen
NOTE:
If using, be sure the ManualOverride option is the first
option used after the Dualhead parameter position in the
statement.
Mainscreen — Sets which screen is used as the main screen.
When using a DVI to DVI and VGA cable, the DVI connected
monitor will be the default mainscreen=1.
Orientation — Default is hort. Sets which style is used for
display. Hort means horizontal and vert means vertical.
Align — Sets how screens are aligned: Top means screens
are top aligned in hort orientation. Left means screens are left
aligned in vert orientation.
Center means screens are center aligned. Bottom means
screens are bottom aligned in hort orientation. Right means
screen are right aligned in vert orientation.
Taskbar — Default is wholescreen. Sets which style is used
for the taskbar: wholescreen places the taskbar at the bottom
of the entire screen; mainscreen places it at the bottom of the
main screen. This is only when SysMode=Classic and has no
effect on VDI mode.
MonitorAutoDetect — Determines whether or not the
system will detect how many monitors are connected. If only
one monitor is connected, Span mode will be transferred to
Mirror mode.
Swap — Default is no. Yes/no option to use with older
ThinOS 7.x builds to swap dual monitors when Mainscreen=2
is set. Swap=yes puts monitor 2 on the left or top of monitor 1
according to the orientation.
For example, if you want a standard dual screen layout you
would use:
DualHead=Yes \ Mainscreen=1 \
Orientation=Hort \ Taskbar=Mainscreen \
Align=Center
Screen=1 Resolution=DDC Refresh=60
Rotate=None Screen=2 Resolution=DDC
Refresh=60 Rotate=None
EnsureDpIsOn—The optional keyword is only used for Wyse
5010 thin client with ThinOS, Wyse 5010 thin client with
PCoIP, Wyse 5060 thin client with ThinOS and Wyse 5060
thin client with PCoIP. When EnsureDpIsOn is set to yes, D-
class will halt at boot time until DP monitor is plugged in.
EnableRAVE={
yes, no}
Default is yes.
Yes/no option to enable the client to use Citrix Multimedia
Acceleration (RAVE) to play supported media files residing
on an ICA server. This is a global parameter for all ICA
connections. EnableRAVE=yes is default.
NOTE:
24 Parameters for wnos INI files only