Administrator Guide

185 File server Password
Optional string. Password to use when
authenticating to the server specied in
Option 161.
186 WDM server list
Optional binary IP addresses of WDM.
This option can specify up to two WDM
servers. If two are specied, at boot time
the thin client attempts to check-in to the
rst server. If it cannot contact the rst
server, it tries to check-in to the second
server.
187 WDM server port Optional number. Byte, word, or two-
bytes array.
NOTE: The value of this option tag,
when not embedded in Vendor
Class Specic Information option,
is interpreted in reverse order when
it is sent as 2-bytes example, the
value of 0x0050 was interpreted as
0x5000. This option tag was used
by old ThinOS releases. New
ThinOS releases still accept this
option tag for backward
compatibility.
188 Virtual Desktop Broker server Optional string.
190 WDM secure port
Optional number, word or two-bytes array.
Species to use HTTPS to communicate
with WDM instead of HTTP.
192 WDM server port Optional number, word or two-bytes array.
NOTE: The value of this option tag
represents the same information as
option tag 187. The dierence is
that ThinOS interprets the value of
this option tag in correct order (for
example, the value of 0x0050 is
interpreted as0x0050). If the
DHCP server provides both option
tag 192 and 187, option tag 192
takes precedence.
194 WDM FQDN Optional Fully Qualied Domain Name for
the WDM.
199
Wyse Management Suite Group Key Optional string. Can provide a Wyse
Management Suite Group Registration
Key for the Wyse Management Suite
agent. When Wyse Management Suite is
disabled and the Group Key of Wyse
Management Suite is null, this option
takes eect. Wyse Management Suite
uses the optional string as the Group
Registration Key. If the Wyse
Management Suite server or MQTT
server is null, the Wyse Management
Suite agent sets the values to the default
server values.
172