Users Guide

Performing an image pull operation

An image pull operation consists of two parts. In the first part, you configure the USB drive for the pull operation by using USB

Imaging Tool. In the second part, you plug in the USB drive to a source device and perform the pull operation.

NOTE: When you prepare the USB drive for a pull operation, the USB drive is also configured for a push operation. You can

use the same drive for a pull or push operation. However, if you use the same key for the push operation, ensure that the

images you want to push are copied to the USB drive.

For more information, see

Configuring USB drive for pull operation.

Pulling an image from a source device.

Configuring USB drive for pull operation

Steps

1. Start USB Imaging Tool.

The tool displays the Image Pull screen by default.

Figure 3. Image Pull

2. Plug in the USB drive to the system running the USB Imaging Tool.

3. Click the Refresh button to populate the USB drives.

NOTE: You can have multiple USB drives plugged to your system.

4. Select the USB drive from the Available drives drop-down list.

Using Dell Wyse USB Imaging Tool