Reference Guide

Options Description
LocalCopy={no, yes} Default is no.
LocalCopy option allows you to save the connection in the local
permanent registry.
Phone=<phone number> For serial connection only.
Specifies the modem dial-up number.
Port= {COM1, COM2...} For serial connection only.
Default is COM1.
Designates the connection serial port.
Reconnect={no, yes} Default is no.
Yes option allows you to automatically reconnect to an application
server after a disconnection.
ReconnectSeconds=<value in seconds> Default is 30.
Specifies the amount of time in seconds to wait before automatic
reconnection to an application server after a disconnection.
Resolution={default, 640x480, 800x600, 1024x768, 1280x1024,
1600x1200, Full Screen, <width>x<height>
Default is default.
which starts the connection using the current desktop display
setting with no window frame or border. Specifies the connection
display resolution. The default value starts the connection using the
current desktop display setting with no window frame or border.
Arbitrary widthxheight values are accepted.
{TerminalType, TerminalID ,Terminal} =<emulationtype> Default is Wyse50.
Specifies the terminal emulation type.
Termname=<terminal ID string> Specifies the terminal identification string that is sent as a
response when a request for identification is requested to the
terminal.
Telnetport=<port number> Changes the default port of Telnet from 23 to the port mentioned
in the INI parameter.
UIconfig={menu, toolbar, status, buttons} Default is no.
Opens the connection window with the menu, toolbar, status bar,
or buttons displayed.
For Example, UIconfig=menu
Connect Parameter Options 51