Reference Guide

Options Description
RdpClipboard={yes,no} Default is yes.
RdpClipboard option is used to enable the clipboard in an RDP
session.
RDServer=<RDServer address> Specifies the RD Gateway host address
RDUsername=<RD UserName> Specifies the RD Username to use for RD Gateway Login
Reconnect={no, yes} Default is no.
Reconnect option is used to automatically reconnect to an
application server after a disconnection.
ReconnectSeconds=<1 to 3600> Default is 30.
Specifies the amount of time in seconds (default is 30) to wait
before automatic reconnection to an application server after a
disconnection. Requires Reconnect=yes or 1.
Resolution= {default, 640x480, 800x600, 1024x768, 1280x1024,
1600x1200}
Default value is default, which starts the connection using the
current desktop display setting.
Specifies the connection display resolution. The default value starts
the connection using the current desktop display setting.
SameLoginForRD={yes,no} Default is yes.
SameLoginForRD option is used to enable Smart Card
Authentication.
SocketRecvTimeout=<timeout in seconds> If the RDP client is unable to connect to the server in 120 seconds,
the connection times out. Using this parameter you can specify a
custom value other than 120 seconds.
This parameter is used for TCP communications only. To use this
parameter effectively, multitransport must be turned off or the
EnableUDB parameter must be set to no.
Sound= {off, local, remote} Default is local.
You can enable or disable the sound effect using the Sound
parameter.
off - disable sound
local - enable sound to local machine (default)
remote - enable sound to remote machine
UseRDGateway={yes,no} Default is yes.
UseRDGateway option is used to enable RD gateway.
Username={<username>, $SN, $MAC, $IP, $DN, $UN, $PW,
$TN}
Default is none.
Specifies the name required to log in to the RDP server.
Either a conventional login name or a variable can be used. Variable
and Description:
username — Conventional log-in name
$SN — Serial number used
$MAC — MAC address used
$IP — IP Address used
$DN — Sign-on domain name
42 Connect Parameter Options