Reference Guide

Options Description
Username={<username>, $SN, $MAC, $IP, $DN, $UN, $PW,
$TN}
Specifies the name required to log in to the application server.
Either a conventional login name or a variable can be used.
Variable and Description:
username — Conventional login name
$SN — Serial number
$MAC — MAC address
$IP — IP Address
$DN — Sign-on domain name
$UN — Sign-on name
$PW — Sign-on password
$TN — Terminal name
RDP Connect Options
The following table contains the supported options you can use for RDP connections where default values are in bold:
Example:
CONNECT=RDP \
Host=192.168.1.2 \
Description="RDP_Server" \
AutoConnect=yes \
Colors=16m \
username=$UN \
Password=$PW \
Domainname=$DN \
Resolution=1280x1024 \
Reconnect=no \
Drives=J=disk \
Drives=k=floppy \
Sound=off \
LocalCopy=Yes \
UseRDGateway=Yes \
RDServer=192.168.1.2 \
SameLoginForRD= Yes \
RDUserName=$UN \
RDPassword=$PW\
RDDomainName=$DN
Table 11. RDP Connect Parameter Options
Options Description
Application=<Remote App Name> Specifies the remote application that you want to launch through
RDP
AutoConnect={no, yes} Default is no.
Connect Parameter Options 39