Reference Guide

Options Description
$IP — IP Address
$DN — Sign-on domain name
$UN — Sign-on name
$PW — Sign-on password
$TN — Terminal name
NOTE: The application server password is not
encrypted. The user is prompted to enter the password
when the connection is made. This application server
password directive never starts a line, so it can be
distinguished from the thin client user sign-on password
which starts a line.
Ping={yes, no} Default is yes.
This option is used to enable ping. For non published application
connections, a ping (ICMP) is sent to the host server prior for
connecting, to verify that the host is reachable.
Reconnect={ no, yes, value of 1 to 3600} Default is no.
It controls the automatic reconnection to an application server
after a disconnection.
Option Value and action:
yes — Immediately restarts the connection in 30 seconds after a
disconnect. Default for reconnect is 30 seconds.
no — (default) Does not reconnect after a disconnect.
1...3600 — (integer) Specifies the interval to wait in seconds
before automatically restarting the connection after a
disconnection. Valid range is 1–3600.
Resolution={ default, seamless, 640x480, 800x600, 1024x768,
1280x1024, 1600x1200}
Default is default, which starts the connection using the current
desktop display setting.
Specifies the connection display resolution. The default value starts
the connection using the current desktop display setting.
Seamless option is applicable only for Published Application and
Storefront connections.
SmartCard={ Yes,no} Default is no.
When set to yes, this option enables logging into the Citrix Server
with a Smart Card PIN. This parameter is not applicable for PA
connections.
SmartCardType={ GEMALTODOTNET, CAC, PIV} Specifies the type of the smart card you are using to make the
connection to the Storefront Server.
To enable smart card login, set parameter SmartCard=yes and
parameter smartcardtype to type of smart card.
NOTE: It is applicable only for storefront server.
StoreFront={yes, no} The option to have the connection attempt to connect to the
Storefront server. There is no default value. If set to no, the
connection attempts to connect to the PNAgent server.
StoreName=< Name of the Store> It specifies the name of the Store through which the connection
for Storefront server is established.
38 Connect Parameter Options