Reference Guide

Parameter Description
[Wep-Key4=<wep-key4>]
[WepKeyIndex=<Key Index number>]
[InnerAuth={MSCHAPv2, MD5,GTC}]
[PeapVersion={Auto, 0, 1}]
[CACertificate=<certificate path>
WEP40/128-BITKEY — WEP 40/128-bit Key
WEP128-BITPASSPHRASE — WEP 128-bit Passphrase
LEAP — leap
WPA&WPA2PERSONAL — WPA and WPA2 personal
WPA&WPA2ENTERPRISE — WPA and WPA2 Enterprise
DYNAMICWEP — Dynamic WEP (802.1x)
AuthType Notes:
AuthType should be OpenSystem or SharedKey when Security is
WEP40/128-BITKEY or WEP128-BITPASSPHRASE; For other enterprise
securities, AuthType should be 'TLS/LEAP/TTLS/PEAP'. For WPA &
WPA2 Enterprise security, only the LEAP authentication type is supported.
WEP-KEY Notes:
WEP-KEY1 through WEP-KEY4 are optional. WEPKEYINDEX=<key index
number> is optional.
IMPORTANT:
If not specified, by default it is set to the key
corresponding to WEP-KEY1.
InnerAuth — Specifies the second EAP type inside the PEAP tunnel. Used
only in cases of PEAP authentication.
PeapVersion - Default is Auto. Specifies the PEAP protocol version.
CACertificate - Root CA certificate name for authentication.
For Examples:
Security type OPEN example: WLAN=wlan1 SSID=XYZ\ Security=none
Mode=Infrastructure.\
Security type WEP 40/128-bit key example:
WLAN=wlan2 SSID=XYZ \
Security=wep40/128-bitkey \
Mode=Infrastructure Wep Key1=1234567890\
WepKeyIndex=1\
AuthType=OpenSystem type\
WEP 128-bit Passphrase example:
WLAN=wlan3 SSID=ABCD \
Security=wep128-bitpassphrase \
Mode=Infrastructure
Wep-key1=1111111111 \
Wep-Key2=2222222222 \
WepKeyIndex=2 \
Authtype=OpenSystem\
Security type WPA & WPA2 Personal example:
WLAN=wlan4 SSID=WPA2 \
Security=wpa&wpa2personal \
Mode=Infrastructure Password=12345678\
Security type LEAP example:
WLAN=wlan5
28
Connection Settings Parameter Options