Reference Guide

Parameter Description
UDPAudioPortLow={yes, no} For Citrix only.
Default is 16500.
This parameter is used to configure UDP port range for real time audio
data packet exchange.
UseLastDomainName={true, false} Default is False
If this ini parameter is set, then in the GDM login window, the username
field is populated with the previous logged in domain username value. This
ini parameter is valid only for domain login and not for local user login.
UseLastLoginName={True, False} Default is False.
If this ini parameter is set, then in the GDM login window, the username
field is populated with the previous logged in domain username value. This
ini parameter is valid only for domain login and not for local user login.
VMWareView.ImageCacheSize=< a number value from 50
to 1024>
Specifies the VMware View client's image cache size A larger cache size
reduces bandwidth usage, but requires more memory on the client. A
smaller cache size requires more bandwidth usage. Valid values for this INI
parameter option are between 50 and 1024. If it is set to a value less than
50, the system automatically uses a value of 50. If it is set to a value more
than 1024, the system automatically uses a value of 1024.
VMWareView.ShowImageCacheHits={no, yes}
VMWareViewExcludeUSBFamily=<storage>
VMWareViewExcludeUSBID=<vidpid>
VMWareViewIncludeUSBFamily=<storage>
VMWareViewIncludeUSBID=<vidpid>
INI Parameter Description
VMWareViewExcludeUSBFamily=<storage> Used to
exclude USB Family. It can be storage/printer/bluetooth
VMWareViewIncludeUSBFamily=<storage> Used to include
USB Family. It can be storage/printer/bluetooth
VMWareViewExcludeUSBID=<vidpid> Used to exclude a
specific USB device.
VMWareViewIncludeUSBID=<vidpid> Used to include a
specific USB device.
Default is no.
Yes/no option to display a visual indication that the image cache in
VMware View client is working. If enabled, the user sees rectangles around
every 32x32 tile in the established session. Set the value on this INI
parameter to yes to see the visual effect.
WLAN=<wlan connection name>
[SSID=<SSID Name>]
[Security={NONE, WEP40/128-BITKEY, WEP128-
BITPASSPHRASE,LEAP, WPA&WPA2PERSONAL,
WPA&WPA2ENTERPRISE, DYNAMICWEP}]
[Mode={Infrastructure, AdHoc}]
[Username=<username>]
[Password=<password>]
[AuthType={OpenSystem, SharedKey, TLS, LEAP, TTLS,
PEAP}]
[Wep-Key1=<wep key1>]
[Wep-Key2=<wep key2>]
[Wep-Key3=<wep key3>]
Wireless LAN can be configured through this INI parameter and the
options.
Supported wireless security types:
Open
WEP 40/128 bit key
WEP 128-bit Passphrase
LEAP
WPA & WPA2 Personal
LEAP in WPA & WPA2 Enterprise
The following security types are supported:
NOTE: All WPA & WPA2 Enterprise authentications except a
LEAP which does not require a certificate.
NONE — OPEN Security type
Connection Settings Parameter Options 27