Reference Guide

Parameter Description
yes: In a Unix environment, a middle mouse performs the same paste
function as the Ctrl+V keystroke combination in the Windows.
no: Disables the middle button paste, when used in the wlx.ini file with ICA
v.10.
NETWORK.ETH0.MTU={ Any positive integer} Default is System assigned automatically Specifies the network card’s
maximum transmission unit size.
PAMLoginEnabled={yes, no} For Citrix only.
PAMLoginEnabled option allows the user to set /reset the domain value
and allows the user to enable or disable PAM login.
Default value is no.
PNAgentServer=<host address or URL>[:<port>][;<host
address or URL> [:<port>]]
Specifies a list of PNAgent servers or complete URL. If not specified, port
depends on the browsing protocol. If multiple servers are mentioned, they
should be separated by ;.
Proxy_Method=Automatic \
URL=<proxy server url>
Proxy_Method=Manual \
Ignore_Host=<url want to ignore> \
Http_Host=<proxy server url> \
Http_Port=<proxy server port>
Https_Host=<proxy server url> \
Https_Port=<proxy server port>
Ftp_Host=<proxy server url> \
Ftp_Port=<proxy server port>
Socks_Host=<proxy server url> \
Socks_Port=<proxy server port>
Proxy_Method=None
The parameter Proxy_Method=Automatic sets the system network
proxy automatically.
The parameter Proxy_Method=Manual allows you to set the system
network proxy manually.
The parameter Proxy_Method=None sets no system proxy, and the
proxy settings is reset to the previous settings.
RapportSecurePort=<443> Default is 443
The secure port number of the WDM service.
RapportServer=< WDMServer-IP or FQDN> Default is none Only IPV4 is supported.
Seamless={yes, no} For Citrix only.
Default is no.
Seamless option is used to set the default resolution for ICA-published
applications to seamless. This parameter is recommended to use for
launching applications, not recommended for launching desktop
connections.
TimeoutDelayLoginForNetwork=<integer from 1 to30> Sets the delay (wait) time before performing the authentication due to
network delay.
UDPAudioPortHigh={yes, no} For Citrix only.
Default is 16509.
This parameter is used to configure UDP port range for real time audio
data packet exchange.
26 Connection Settings Parameter Options