Reference Guide

Parameter Description
To map drives on the server to USB mass storage devices attached to the
thin client, where:
drive letter= A to Z
device name= usbstorage-x and cdrom-x, where x=0,1,2 and so on.
rw= read/write
ro= read only
basedir= an optional directory on the USB device to use.
ICADynamicDriveMapping={yes, no} For Citrix only.
To enable or disable mapping of a single device based on the device name
Default value is no.
ICADynamicFolderMapping={yes, no} For Citrix only.
To enable or disable mapping of all the devices listed in the standard mount
point. For example, /run/media. Hence it allows the user to enable or
disable PAM login.
Default value is no.
ICADynamicMapping={yes, no} For Citrix only.
To enable or disable file system mapping for ICA session.
Default value is yes.
ICAFullscreen={yes, no} For Citrix only.
Default is no.
Enables to run the session at full screen not in a window.
ICAhotkey={yes, no}[<hotkey name>=<supported value>] For Citrix only.
Default is yes.
Yes/no option to enable and allow mapping of the hotkeys.
For example:
ICAhotkey=yes
Hotkey1Char=F1 Hotkey1Shift=Shift
Hotkey2Char=F3
Hotkey2Shift=Shift Hotkey3Char=F2
Hotkey2Shift=Shift Hotkey3Char=F2
Hotkey11Char=plus Hotkey11Shift=Ctrl
NOTE: All hotkey options must be on one line.
ICAMMAudio={yes, no} For Citrix only.
ICAMMAudio is used to enable Citrix HDX Multimedia audio. This
parameter requires two thin client reboots. If this parameter is set, then
audio will be played by using client encoding and decoding capabilities.
ICAMMVideo={yes, no} For Citrix only.
Default is yes.
ICAMMVideo option is used to enable Citrix HDX Multimedia video.
24 Connection Settings Parameter Options