Reference Guide

Parameter Description
This setting is valid only when Keyboard.Repeat is enabled (true).
Keyboard.layouts=<value of Keyboard.layouts> For example: Keyboard.layouts=fr (for french).
For information about the values that you can use for the
Keyboard.layouts parameter, see Keyboard Layouts Parameter: Values.
Printer={USB <options> or URI} Specifies the USB for local USB printer. Only one USB printer can be
supported. The USB printer will not be configured if it is not attached.
For other types of printers, URI needs to be provided, such as
parallel:/dev/lpunit or serial:/dev/ttySunit?baud=speed.
For parameter options used in the command line, see Printer in
Printer Parameters Options.
PrinterURI=<uri> For Example:
PrinterURI=[ipp://[user[:password]@host[:port]/path
[http://[user[:password]@host[:port]/path
[socket://host[:port]
[lpd://host/queue
[smb://[user[:password]@[workgroup/]
server[:port]/sharename
[usb:/dev/usb/lpunit
[parallel:/dev/lpunit [serial:/dev/ttySunit?baud=speed <Option>
SMBPrinter=<host address>
For Example:
SMBPrinter=<host address>
[username=<username>] [password=<base64-encoded password>]
[domain=<Windows domain>] <options>
For parameter options used in the command line, See SMBPrinter in
Printer Parameters Options.
Usb_Boot_Support=[Enable\Disable]
BIOS_Password=<password>
This parameter allows you to enable or disable the USB boot support
and same setting is displayed in the BIOS setup menu in Settings &
System. The current BIOS password is required to make the changes.
Front_Usb_Port=[Enable\Disable]
BIOS_Password=<password>
This parameter allows you to enable or disable front USB port and same
setting is displayed in the BIOS setup menu in Settings & System. The
current BIOS password is required to make the changes.
Rear_Usb_Port=[Enable\Disable]
BIOS_Password=<password>
This parameter allows you to enable or disable rear USB port and same
setting is displayed in the BIOS setup menu in Settings & System. The
current BIOS password is required to make the changes.
USB_Rule=Allow_All This parameter allows you to enable all USB devices.
USB_Rule=Deny_All This parameter disables all USB devices, including keyboard and mouse.
USB_Rule=Deny_All_Ex_Hid This parameter disables all USB devices, excluding keyboard and mouse.
USB_Rule=Deny_Class \
Class=<device to be blocked>
This parameter disables USB devices that are specified in class.
For e.g : Class=Smartcard,Storage,Video,Audio
view.enableMMR={TRUE, FALSE}
Enable Multimedia redirection for VMware Horizon view connections.
The default value is FALSE.
Peripheral Settings Parameter Options 19