Reference Guide

Parameter Description
It specifies the complete URI (server URL and file full path) of the
configuration files to import.
ImportConfig.UID=<string> Default is none.
It is the User ID used when importing the configurations file from an
FTP server.
ImportConfig.Password=<string> Default is none
It is the password used when importing the configurations file from
an FTP server.
MerlinUpdate.URL=<string> This parameter specifies the URL to the directory where the Merlin
image is placed. Macro $PLATFORM is automatically appended for
Merlin imaging.
MerlinUpdate.Username=<string> This parameter specifies the user name used to log in to the server.
You need to configure this parameter if the
MerlinUpdate.Username=<string> is defined.
MerlinUpdate.Password=<string> Default is base-64 encryption. The password is used to login the
server.
You need to configure this parameter if the
MerlinUpdate.Username=<string> is defined.
MerlinUpdate.Preserve_User_Setting={yes, no} Default is no.
This parameter enables you to retain any previously configured user
settings in the ThinLinux build even after you perform an image
upgrade.
MicMute={yes, no} Default is no
If MicMute is set to yes, then it mutes the microphone volume.
MicVolume=<0-100> Determines the microphone volume level.
MgmtDiscoveryMethod={SRV, HOSTNAME, CNAME, STATIC,
ALL, DHCP }
Default is ALL .
The Discovery method used for finding WDM server.
NTP.Enable={yes, no} Default is no.
It Specifies that the NTP daemon should be enabled and started.
NOTE: NTP server will not be started if an
NTP.TimeServer parameter is not specified and the thin
client does not have one previously set.
NTP.TimeServer=<NTP Server IP or FQDN> [;<NTP Server IP or
FQDN>;....}
Default is None.
It specifies one or more NTP server IP Addresses or FQDNs.
PermitSshRootLogin={yes, no} Default is no, It used to prohibit the root SSH login. You can enable
or disable the root login through SSH. It works only if SSH is enabled.
PowerButtonAction ={interactive, reboot, restart, halt,
shutdown, none, nothing}
Default is interactive
It specifies system behavior when the power button is pressed.
none or nothing: Power button is ignored, that is no action.
Interactive: An optional window is presented to you.
halt or shutdown: Shuts down the devices.
General settings parameter options 13