Administrator Guide

Figure 61. VMware connection peripherals settings

Table 18. Peripherals

Parameter Description

Automatically Connect USB when inserted

Click the ON/OFF button to enable or disable this option.

Select this option if you want to automatically connect your

USB drive to the thin client after you plug-in the USB drive.

Automatically Connect USB at Startup Click the ON/OFF button to enable or disable this option.

Select this option if you want to automatically connect your

USB drive to the thin client when you start the system.

Allow Access to Removable Storage Click the ON/OFF button to enable or disable this option.

Select this option if you want to permit access to use

removable storage devices.

6. Click Save to save the settings.

Configuring and managing the VNC viewer

connections

The VNC Viewer connections page enables you to create and manage the VNC connections. The main VNC connections page

has options to create a VNC connection.

To configure the VNC Viewer Settings, complete the following task:

1. Click the + icon to add a new VNC connection. The VNC Viewer Connections page is displayed.

2. Enter the name of the VNC connection.

Configuring Connections locally