Administrator Guide

Figure 55. RDP login settings
Table 14. RDP login settings
Parameter Description
Server Enter the IP address or FQDN of the RDP server to which
you want to establish a connection.
Username Enter the Username to log in to the RDP Server.
Password Enter the Password to log in to the RDP Server.
Domain Enter the Domain to log in to the RDP Server.
Use RD Gateway Select to enable and configure an RD Gateway to connect to
your remote computers, if required by your network
administrator and then do one of the following:
● To configure the RD Server, and then Use Remote
Desktop Credentials for RD Gateway—Enter the RD
Server IP address or URL of the Remote Desktop
Gateway server, and then select the Use Remote
Desktop credentials for RD Gateway check box, if the
server credentials are the same credentials as your RDP
host remote computer credentials.
● To configure the RD Server, and then Manually enter RD
User Name, RD Password, RD Domain—Enter the RD
Server IP address or URL of the Remote Desktop
Gateway server. Clear the Use Remote Desktop
credentials for RD Gateway check box and then manually
enter the Username, Password, and Domain of the RD
Gateway server, if required.
Configuring Connections locally 77