Administrator Guide

Table 9. Server (continued)

Parameter Description

When disconnect, reconnect Select the time duration in seconds to delay the reconnection

attempt after a disconnection occurs.

Smartcard login

Click the ON button to enable smart card login to the thin

client. The User Name, Password, and Domain are not

required.

NOTE: Smart Card Login is applicable only for Server and

Storefront Connections

Smartcard type This field is enabled when you select Smart Card Login.

Select the type of smart card you are using from the drop-

down list.

Application command line Enter the command line for the program on the server.

Serial number Enter the serial number for environments that require the

thin client license serial number.

Working directory

Enter the working directory for the program.

NOTE:

Working Directory is applicable only for Server

Connections.

Click the Show advance settings to view and configure the advanced options for your Citrix server connection.

NOTE:

The advanced options are available only for server connections.

Table 10. Advanced options

Parameter Description

Alternate Firewall From the drop-down list, Select Yes to use an alternate

address for firewalls.

Auto-detect proxy Click the ON button to automatically detect the proxy type.

Click the OFF button to manually enter the proxy type.

Proxy type From the drop-down list, Select a proxy type.

Proxy Address From the drop-down list, Select a proxy address.

NOTE: If you select Secure (HTTPS) or SOCKS as the

Proxy Type, you must enter the Proxy Address and Port.

If Published Application or Storefront is selected as the Connection Type, the following options must be configured in

addition to the options listed for Server Connections Table.

Store Name—Enter your preferred store name. Multiple store names are not supported.

NOTE:

● SmartCard Login option is not available for Published applications.

● The Storefront option is applicable only for Citrix XenDesktop 7.0 and later versions. Select this option to specify the

name of a Store Front server to display the applications available in that sever.

● Smart card type option is not applicable for Server connections.

The following options must be configured in the Experience tab.

Configuring Connections locally