Administrator Guide

Figure 38. Browser connection login settings

2. In the Login tab, enter the URL address of the browser connection you want to connect to.

3. Enter the name of the Browser connection for which you have specified the URL address.

4. Click the ON/OFF button to enable or disable the auto-connect option after you log in to the session.

5. Click the ON/OFF button to enable or disable the auto-reconnect option after you disconnect from the session. If the Auto-

reconnect option is enabled, you can enter the Delay duration (in seconds) to reconnect to the session. The default

value is 30 seconds.

6. Click the Experience tab to set the window resolution and Kiosk mode.

Configuring Connections locally