Administrator Guide

○ Disable all USB Devices

○ Disable by USB Class

● Disable by USB Class—Click the ON/OFF button to enable or disable this option.

If this option is enabled, you must configure any of the following options:

○ Disable Video Devices—Click the ON/OFF button to enable or disable this option. If this option is enabled, the

operating system does not detect the video devices that are connected to the thin client.

○ Disable Storage Devices—Click the ON/OFF button to enable or disable this option. If this option is enabled, the

operating system does not detect the storage devices that are connected to the thin client.

○ Disable Smartcard Devices—Click the ON/OFF button to enable or disable this option. If this option is enabled, the

operating system does not detect the smart card devices that are connected to the thin client.

○ Disable Audio Devices—Click the ON/OFF button to enable or disable this option. If this option is enabled, the

operating system does not detect the audio devices that are connected to the thin client.

○ Disable Printer Devices—Click the ON/OFF button to enable or disable this option. If this option is enabled, the

operating system does not detect the printers that are connected to the thin client.

3. Click Save to save the settings.

Network

On the System Settings page, click the Network tab to view the Network Settings page.

1. Click the Network icon.

2. The Network settings page is displayed. In the left-pane, the following tabs are available for you to configure.

● Wi-Fi

● Wired

● Network proxy

Configuring the wi-fi settings

To configure the Wi-Fi settings, perform the following steps:

1. In the left-pane, click Wi-Fi tab.

2. Click the ON/OFF button to enable or disable the Wi-Fi option. The list of wireless SSID is displayed if broadcast is enabled.

Configuring thin client settings locally