Administrator Guide

NOTE: By default, the Keyboard screen is available in both User mode and Admin mode. Any changes made through
Keyboard preferences screen is saved and preserved over reboots for the built-in thinuser
Figure 21. Keyboard preferences
1. Click the ON/OFF button to disable or enable the Key presses repeat when held down option after you log in to the
session.
2. Move the slider to the left to decrease the repeated delay time of the pointer or move the slider to the right to increase the
repeated delay time of the pointer.
3. Move the slider to the left to decrease the repeat rate of the pointer or move the slider to the right to increase the repeat
rate of the pointer.
4. In the keyboard layout box, select the layout you want to use and click Add to include the preferred layout in the currently
added layouts list.
5. Select the preferred keyboard layout from the currently added layouts list, and click Set as Default Layout button to set
the default layout.
NOTE: The default keyboard layout is listed on the top of the currently added layout list.
6. Click Save to save your changes.
Wyse 5470 thin client supports the following short-cut key functions:
● Fn+F1—Mutes Audio
● Fn+F2—Decreases volume
● Fn+F3—Increases volume
● Fn+F10—Adjusts keyboard backlight brightness and toggles backlight on/off
● Fn+F11—Decreases LCD brightness
● Fn+F12—Increases LCD brightness
Setting the mouse and touchpad preferences
By default, the Mouse and Touchpad screen is available in both User mode and Admin mode. Any changes made through the
Mouse and Touchpad preferences screen is saved and preserved over reboots for the built-in thinuser.
Configuring thin client settings locally
31