Administrator Guide

Figure 20. Bluetooth settings
2. After the Bluetooth is enabled, click Save.
On the upper-right corner of the screen, the Bluetooth Enabled notification is displayed for a few seconds.
3. Click the Bluetooth icon to start searching for Bluetooth devices.
The thin client searches and lists the Bluetooth devices that are discoverable.
NOTE: If the Bluetooth ON/OFF button is disabled, the device does not support the Bluetooth functionality.
4. Click the Bluetooth device from the list.
5. When prompted, confirm the Bluetooth PIN on your external Bluetooth device, and then click Confirm on your thin client.
If the pairing is successful, a Connected status is displayed next to the device name.
6. Close the Bluetooth page.
Send files to a Bluetooth device
You can use Bluetooth to send files from your thin client to an external device.
Prerequisite—Ensure that you have turned on Bluetooth, and the devices are paired.
1. In the Devices list, click the desired device.
A dialog box specific to your connected device is displayed.
2. Click Send Files.
3. Choose the file you want to send and click Select.
4. On the paired device, accept the file.
A progress bar is displayed in the Bluetooth File Transfer dialog box.
5. When the file transfer is complete, Click Close.
If the file transfer is unsuccessful, click Retry.
Setting the keyboard preferences
The Keyboard setting page enables you to set the Keyboard preferences and make the Keyboard layout.
30
Configuring thin client settings locally