Administrator Guide

b. Click the Add option, and update the default data.
3. In the Hide Desktop icons section, configure any of the following options:
NOTE: These options are applicable for user mode only.
● Firefox Web Browser—Click the ON/OFF button to enable or disable this option. If you enable this option, the Mozilla
Firefox web browser icon is not displayed on the desktop.
● Google Chrome—Click the ON/OFF button to enable or disable this option. If you enable this option, the Google
Chrome web browser icon is not displayed on the desktop.
● Settings—Click the ON/OFF button to enable or disable this option. If you enable this option, the Settings app icon is
not displayed on the desktop.
If the Settings app is hidden, and if you log into the thin client with user credentials, then you cannot open the Settings
app or switch to the admin mode. You can restore the Settings app using one of the following methods:
○ Use INI parameters.
○ Log in to the thin client with admin credentials and enable the Settings option.
○ Perform a factory reset or factory recovery.
● Quick Start—Click the ON/OFF button to enable or disable this option. If you enable this option, the Quick Start
application is not displayed on the desktop.
● Hide all Desktop icons—Click the ON/OFF button to enable or disable this option. If you enable this option, the
created connection icons are not displayed on the desktop.
4. Click Save.
Configuring the power-saving settings
The Power page enables you to configure the power-saving settings.
Figure 18. Power Saving settings
To configure the power-saving settings, do the following:
1. From the Turn off screen after drop-down menu, select the time to turn off the display after the specified idle time.
NOTE: By default, the idle time is set to 4 minutes to comply with ENERGY STAR category.
Configuring thin client settings locally 27