Administrator Guide

NOTE: To turn off a display, select a display from the display grid, and click the Display OFF button. Ensure that you

arrange all the active displays first and move all the inactive displays to the end of the layout.

3. To enable the Set as primary option, click the ON/OFF button. This option enables you to set the selected display as the

primary display.

4. To set a common resolution for all the connected displays, click the ON/OFF button.

5. From the Resolution drop-down list, select the preferred resolution.

6. From the Layout drop-down list, select any of the following layout types:

NOTE: After you install the ThinLinux image, select the 2 screens per column layout and arrange all displays with 4K

resolution followed by displays with 2K resolution. If any of the display enters the mirror mode or overlaps after reboot

or factory reset, you must follow the preceding configuration.

● Horizontal—Enables you to drag the applet window horizontally, from the primary display to the rest of the displays.

Figure 12. Horizontal layout

PM1—Primary display (display 1), M2—Display 2, M3—Display 3, M4—Display 4, M5—Display 5, M6—Display 6

NOTE:

The horizontal option is available for either six displays with 2K resolution or four displays with 4K resolution.

This option is not applicable for six displays with four 4K and two 2K resolutions.

● Vertical—Enables you to drag the applet window vertically, from the primary display to the rest of the displays.

Configuring thin client settings locally