Administrator Guide

Figure 11. Display settings

2. To set a common resolution for all the connected displays, click the ON/OFF button.

3. From the Resolution drop-down list, select the preferred resolution.

4. From the Rotation drop-down list, select the rotation.

● Normal

● Right

● Left

● Upside-down

5. To enable the screen mirroring for secondary displays in a multi display configuration, click the ON/OFF button.

6. To enable the Set as primary option, click the ON/OFF button. This option enables you to set the selected display as

primary.

Customizing multiple displays on the Wyse 5070 extended thin client

NOTE: This section is applicable only to the Wyse 5070 extended thin client.

By default, the Customize your display screen is available in both user mode and admin mode. Any changes to display

preferences are saved and available for the built-in user named thinuser. For information about hardware capability and ports

preferences, see Dell Wyse ThinLinux 2.2 Operating System and Add-ons Release Notes at www.dell.com/support.

NOTE: INI parameters are not supported on a multi-display setup with more than three displays.

To customize the display, do the following:

1. Click the Display tab.

The Customize Your Display page is displayed.

2. Select a display that you want to turn on or turn off from the display grid, and click the ON/OFF button.

Configuring thin client settings locally